Smoke Alarm Installations Perth

When Did You Last Think About Your Smoke Alarms?

Battery Going Flat, Alarms That Aren't Interconnected, a Rental That Hasn't Been Checked in Years

It’s More Common Than You’d Think

Most homeowners don’t think about their smoke alarms until one starts beeping at 2am with a flat battery or worse, when it actually matters. Western Australian regulations around smoke alarms have tightened significantly in recent years, and a lot of homes, particularly older ones and rental properties simply don’t meet current requirements. A smoke alarm that isn’t mains-powered or isn’t in the right location isn’t doing its job properly. For homes built from 1 May 2014 onwards, hard-wired interconnected alarms are also required, so when one sounds, they all sound. For older properties, the requirements differ, and in some situations such as apartments on concrete slabs where cabling was never installed, 10-year lithium battery alarms are the accepted alternative.

Here’s what we commonly see:

Battery-powered alarms that haven’t been tested or replaced in years
No interconnected smoke alarm system if one goes off, the others don’t
Alarms that aren’t mains-powered or interconnected as required for properties built from 1 May 2014 onwards
Rental properties that haven’t had smoke alarms checked or upgraded
Older homes with alarms in the wrong locations or not enough of them
Homeowners who aren’t sure whether their current setup is compliant

If you’re not confident your smoke alarms are compliant and working properly, it’s worth getting it checked, it’s one of those things you don’t want to find out about the hard way.

A Flat Battery or a Non-Compliant Alarm Won't Save You When It Counts

It sounds obvious but a smoke alarm that isn’t working or isn’t in the right spot is essentially no alarm at all. For homes built from 1 May 2014 onwards, alarms that aren’t interconnected also fall short of what’s required, if one doesn’t trigger the rest, someone in another part of the house may not get the warning they need in time. In a real fire, the difference between an alarm that wakes you up and one that doesn’t can be life or death. Beyond the personal safety side, non-compliant smoke alarms in a rental property or a property being sold can create real legal and insurance complications for owners and landlords.

Getting it done properly now is far simpler and far cheaper than dealing with the consequences of getting it wrong.

Not Sure if Your Smoke Alarms Are Up to Standard?

We'll check your current setup, let you know exactly what's required and give you a clear, honest quote - no pressure, no overselling.

Book a Free Assessment

We Check, Advise and Install - No Guesswork, No Shortcuts

Getting your smoke alarms sorted properly is straightforward when you know what’s required. Here’s how we handle it:

We assess your current setup
Before recommending anything, we check what you have, where alarms are located and whether your existing installation meets current Western Australian requirements. You’ll get a straight answer on what’s compliant and what isn’t.

We advise on what’s actually needed
WA smoke alarm regulations specify the type of alarm, location requirements and interconnection. We’ll explain exactly what applies to your property whether it’s a family home, a rental or a property going through a sale.

We install the right alarm for your property
Not every property can be hard-wired, apartments built on concrete slabs where cabling wasn’t run during construction are a common example. In these situations, 10-year lithium battery alarms are the accepted compliant alternative. For homes built from 1 May 2014 onwards, we install hard-wired, interconnected alarms so when one sounds, they all sound. We’ll assess your property first and recommend the correct solution before anything is quoted or installed.

We position them correctly
Placement matters. We install alarms in the locations required under current regulations not just wherever is most convenient to wire.

We test everything before we leave
Every alarm is tested after installation to confirm it’s working correctly and communicating with the rest of the system.

Get a Free Quote

Have Any Question? CAll Us

0424 924 646

What our clients are saying

      EXCELLENT  
   Based on 31 reviews 
    
 
 
 
   
 
 
       Posted on Google  
   
   Kartik Goradia 
 
 
 
 Trustindex verifies that the original source of the review is Google. Harrison has done an incredible job of installing a double GPO and a Tesla Wall Charger in my garage. He’s communicated well, very knowledgeable, honest and is generally a top bloke!
I’d highly recommend his services and he’s got my future business.
  
 
      Posted on Google  
   
   Harry 
 
 
 
 Trustindex verifies that the original source of the review is Google. Had Integrity Power Solutions out for a sizeable issue at our place. Harrison sorted it without any fuss. Showed up on time, easy to deal with, and explained what was going on. Noticed a couple of smaller problems I hadn't even realised and fixed those too. great service will be calling them next time something goes wrong.
  
 
      Posted on Google  
   
   Ilnur Minniakhmetov 
 
 
 
 Trustindex verifies that the original source of the review is Google. Harrison did great job on moving our switchboard. Tedious work, but he did it effitiently and neat. Very good communication skills, always friendly and clearly communicates all options with pros and cons. He was punctual, competent, and left the place clean after the work was done. Totally recommend him!
  
 
      Posted on Google  
   
   Jeffrey Hannan 
 
 
 
 Trustindex verifies that the original source of the review is Google. Harrison and Integrity Power Solutions Pty Ltd have been fantastic to work with. I had several electrical matters that I wanted and needed attending to in my home. Harrison provided a courteous and professional initial engagement via email, which then extended through in-person quoting and job completion. Harrison was on time, responsive, knowledgeable and able to offer advice to any relevant query thrown his way. The completed work was completed to a very high standard with all areas (being most rooms in my home) respectfully left tidy after after works were completed. I wouldn't hesitate to ask Harrison and Integrity Power Solutions to undertake any future electrical work that may be required in my home. Thank you for a job well done!
  
 
      Posted on Google  
   
   Lee Yang Yang 
 
 
 
 Trustindex verifies that the original source of the review is Google. Very professional and on time. Came to my house complimentary to check my switchboard before quoting and offered good advice even though I didn't go ahead. All the best
  
 
      Posted on Google  
   
   Karen Lark 
 
 
 
 Trustindex verifies that the original source of the review is Google. I can highly recommend Harrison at Integrity Power Solutions.
He did a great job of rewiring our garage.   He was happy to work in with our timing and made sure everything was completed ready for next services.
We will certainly be using his services again for any future electrical work.
  
 
      Posted on Google  
   
   LUANA MARTIN 
 
 
 
 Trustindex verifies that the original source of the review is Google. Very reliable and honest, I would highly recommend
  
 
      Posted on Google  
   
   Alynne Ferronato 
 
 
 
 Trustindex verifies that the original source of the review is Google. Harrison was incredible helpful. He answered all our questions and helped us choose the right ceiling lights for our home. The work was done very quickly and he cleaned everything after it was done. We will definitely hire him again if we need.
  
 
      Posted on Google  
   
   Renata Santiago 
 
 
 
 Trustindex verifies that the original source of the review is Google. Absolutely 10/10. From the first message he was quick to respond, clear in communication, and very professional. He arrived exactly on time and completed the job to a very high standard. You can tell he takes real pride in his work and wants the result to be perfect. Very polite, very presentable, and a pleasure to deal with. It’s rare to find someone this reliable and easy to work with. I would not hesitate to recommend him and would happily hire him again.

Get Your Smoke Alarms Sorted - Before It Matters

Book a free assessment with a licensed Perth electrician. We'll check your current alarms, confirm what's required and get everything installed to the correct standard.

Request a Free Quote

Frequently asked questions.

1. What does WA law require for smoke alarms?

Western Australian regulations require mains-powered smoke alarms in all residential properties, but the specific requirements depend on when your home was built. Homes approved for construction from 1 May 2014 onwards must have hard-wired, interconnected smoke alarms, meaning when one activates, they all sound. Homes built before this date are not automatically required to have interconnected alarms unless the property undergoes certain major alterations or additions that trigger current building code requirements. Requirements also vary depending on whether the property is being sold, rented or is owner-occupied. We'll assess your specific situation and advise on exactly what applies, no guesswork, just a straight answer.

2. Do I need interconnected smoke alarms?

It depends on when your home was built. If your home was approved for construction from 1 May 2014 onwards, yes, hard-wired, interconnected alarms are required so that when one detects smoke, every alarm in the home sounds simultaneously. For homes built before that date, interconnection isn't automatically required unless major renovations trigger the current building code. There are also situations — such as apartments built on concrete slabs where cabling wasn't installed during construction, where hard-wiring simply isn't possible. In these cases, 10-year lithium battery alarms are an accepted alternative. We'll assess your property and recommend the correct solution for your specific situation.

3. How many smoke alarms do I need?

It depends on the size and layout of your home. Current regulations specify minimum locations including bedrooms, hallways and living areas. We'll assess your property and advise on the correct number and placement.

4. I have a rental property - what are my obligations?

Landlords in WA have specific obligations around smoke alarm compliance. For rental properties in homes built from 1 May 2014 onwards, hard-wired interconnected alarms are required. For older properties, the requirements differ, and for apartments where hard-wiring to a concrete slab isn't possible, 10-year lithium battery alarms are the accepted alternative. We work regularly with property managers and landlords to ensure rental properties meet the correct standard for their specific property type, and we provide documentation after every installation.

5. Can you replace existing battery alarms with mains-powered ones?

Yes, this is one of the most common upgrades we carry out. We hardwire new mains-powered alarms into your home's electrical system and interconnect them throughout the property. For apartments on concrete slabs where hard-wiring isn't possible, 10-year lithium battery alarms are the correct compliant solution, we'll confirm which applies to your property before any work is carried out.

6. How long does a smoke alarm installation take?

For a typical home, a full smoke alarm upgrade is usually completed within a few hours. We'll give you a clear timeframe when we quote based on your property.

Get a Free Smoke Alarm Quote

Tell us about your property and we’ll come back to you with clear advice on what’s required and honest pricing – no jargon, no pressure.

Email

harrison@integpwr.com

Call

0424924646

Service Area

Perth's western suburbs & surrounds, including Subiaco, Wembley, Floreat, Shenton Park, Jolimont, Claremont, Nedlands and Perth CBD.